Reusable Syringe Filter Holders
Reusable Syringe Filter Holders
Plastic (PP) Reusable Membrane Filter Holders
Description
The Re-usable Syringe Filter holders are unaffected by chemicals and contains no trace elements which could be released into the liquid being filtered. It is therefore extremely well suited for particle removal for sample preparation.
Has a female luer with threads on the outside, so when fittend onto luer lock syringe, there is no accidental detachment or popping off of filter holder even under pressure for filtration. The outlet nozzle has a male luer lock arrangement to enable the user securely fit a needle during filtration, if required.
Specifications
· Compatibility Chemical resistance as for polycarbonate and silicone
· Connectors Luer lock inlet and Luer slip outlet
· Dead volume Less than 0.3 ml after bubble point
· Filter Requires 13, 25, 50 mm diameter membrane filter
· 25 mm diameter Filtration area 3 cm2
· Flow rates Typical values for water at 1 bar (100 kPa), 70 ml/min with 0.2μm, 110 ml/min with 0.45 μm pore size filters
· Materials polypropylene top and bottom part. Silicone gasket (20.5 x 26.5mm, replacement for a pack of 10)
· Pressure limit Max. operating pressure, 7 bar (700 kPa)
· Sterilisation By autoclaving (121°C)